Corned Beef Brine
Making your own corned beef brine is quite easy. You just have to soak your roast in it for 7-14 days.
I make a brine whether I'm using a store bought corned beef or a beef roast that I'm going to corn. The only difference between the brine for the store bought corned beef and making your own corned beef from a beef roast is curing salt and any extra seasonings that you would like to add such as a bay leaf, cloves, juniper berries, etc.
This corned beef brine recipe is for a store bought corned beef roast. The store bought corned beef roast technically doesn't have to brine as long as a beef roast that you're corning from scratch but I like to let a store bought corn beef sit in the brine for at least 5-7 days. Although, I've gone as short as 24 hours and it was still awesome.
To turn a fresh beef roast into corned beef, you generally need to let it cure in a properly prepared brining solution for 5–10 days in the refrigerator, although larger or thicker cuts may require 10–14 days. A more in depth explanation of 'corning' can be found at the bottom of this article.
- The Brine
- 2 cups Water
- 5 cloves Garlic (crushed and sliced)
- 1/4 small Onion (sliced into strips)
- 1 tsp whole Black Peppercorn
- 1 tsp ground Black Peppercorn
- 1/2 tsp ground Peppercorn Medley
- 1/2 tsp Garlic Powder
- 1/2 tsp Onion Powder
- 1/2 tsp Salt
- 1 tsp Parsley
- The Roast
- 4-6 pound Corn Beef Roast (Beef Roast if corning your own)
- 1 bottle/can Beer (Bud Ice works great but dark beers are recommended)
- 3 cloves Garlic (crushed and sliced - raw)
- 1/4 small Onion (sliced into strips - raw)
- 1/4 tsp whole Black Peppercorns
- 1/2 tsp ground Black Peppercorn
- 1/4 tsp ground Peppercorn Medley
- 1/4 tsp Garlic Powder
- 1/4 tsp Onion Powder
- 1/4 tsp Salt
- 1/2 tsp Parsley
- Place the store bought Corn Beef Roast in a large bowl.
- Pour one bottle of beer over the roast - set aside.
- Get started on the Brine. (*See Notes if you want to corn a beef roast) In a small saucepan combine the Brine ingredients (water, garlic, onions, black peppercorn whole and ground, ground peppercorn medley, garlic powder, onion powder, salt and parsley).
- Bring to a boil on Med-High heat.
- Once boiling lower heat to Medium and let simmer for 10-15 minutes stirring frequently.
- Remove from heat, add 6 ice cubes and 1 cup cold water. Stir until ice is melted. Set aside to cool.
- While the Brine is cooling, go back to the roast soaking in beer, add the roast ingredients (raw garlic, raw oninos, black peppercorn whole and ground, ground peppercorn medley, garlic powder, onion powder, salt and parsley).
- The Brine will probally still be too warm to add to roast, a quick way to cool it down is to fill the sink with cold water so that it comes a quater of the way up the outside of the pan, set pan in water and stir the brine mix for a minute, then check temperature. It should be cool enough to add.
- Add the cooled brine mixture to the roast, beer and seasonings.
- Turn roast in mixture a few times to mix up the ingredients.
- Set roast down in bowl. Liquid should come slightly over roast.
- Cover bowl with cover or tightly with plastic wrap.
- Turn roast in bowl daily, mixing liquid.
- After a few days, the roast will absorb some of the liquid and a little of the roast may be sticking out of brine. This is ok.
- If the liquid level goes down so that a good portion of the roast is sticking out of brine, add a small amount of water to just cover the roast.
- Recommended time to leave roast in brine is 5-7 days for a store bought corn beef roast. If corning your own, recommended time is 7-14 days.
- Before cooking, remove roast from brine and rinse well.
Nutritional information is based on Brine only.
Nutrition Facts (Per Serving)
"Nutrition values are approximate estimates. Actual facts may vary depending on ingredient brands and preparation methods."
You DO NOT need to use curing salts for the store bought corn beef roast. They've already been used in store bought corned beef. Table salt for seasoning here is all that's needed. As mentioned, you can add any other spices you'd like to this brine.
Important: The brining solution in this original recipe is intended to enhance the flavor of already-cured corned beef. It does not contain the salt concentration or curing ingredients necessary to safely cure fresh beef. Do not use it as a substitute for a tested corned beef curing recipe.
Check out the Corn Beef Roast recipe for cooking instructions and what I made from this brined roast pictured.
Optional: Making Corned Beef from a Fresh Beef Roast
This recipe above is designed for a commercially prepared corned beef roast that has already undergone the curing process. If you prefer to make corned beef from a fresh, uncured beef brisket, you'll need to cure the meat separately before proceeding with the recipe above.
What Is Corning?
Corning is a traditional method of curing beef using salt and seasonings. The name comes from the coarse grains of salt, historically called "corns," that were used to preserve meat. Modern corned beef is commonly prepared using a seasoned salt brine, often containing sodium nitrite to develop its characteristic pink color and cured flavor.
Preparing Fresh Beef for Corning
Start with a fresh beef brisket, preferably weighing between 4 and 6 pounds. A proper corned beef curing solution generally contains water, salt, sugar, and pickling spices such as mustard seeds, coriander, peppercorns, bay leaves, and allspice. Many recipes also use Prague Powder #1, a curing salt containing sodium nitrite (and is not Himalayan pink salt).
For safe preparation, follow a tested corned beef curing recipe that provides exact measurements for the weight and thickness of your brisket. Curing salt must be measured precisely and should never be substituted with ordinary pink Himalayan salt.
Depending on the curing method and thickness of the meat, the process commonly takes approximately 5 to 10 days, although some recipes require longer. Keep the brisket refrigerated at 40°F (4°C) or below throughout the process, completely submerged in the curing solution when using a wet brine.
After the Curing Process
Once the brisket has completed its prescribed curing time, remove it from the solution, discard the curing liquid, and follow the curing recipe's rinsing instructions. The beef is now ready to be cooked as corned beef and you can use the recipe provided above to add your own flavor.
